Solar Wireless Swimming Pool Thermometer Digital Swim Floating Hot Tub Pond Spa

Solar Wireless Swimming Pool Thermometer Digital Swim Floating Hot Tub Pond Spa
  • Sellerkids-educare.com
  • List PriceUS$25.94piece
  • Sale PriceUS$25.94piece
  • ShippingFree Shipping
  • Ratings3,9 (431)

Product Description

Specifications:
- Material : ABS(Acrylonitrile Butadiene Styrene)
- Receiver Size: Approx. 14.5 x 8.5 x 2cm/5.71 x 3.35 x 0.79''
- Transmitter Size: Approx. 12 x 7.5 x 2.5cm/4.72 x 2.95 x 0.98''
- Distance between sensor and the host: 100 meters
- Frequency: 433 Hz
- Outdoor temperature range: -40 ~ 60 Degrees
- Temperature sensor response time: 48 seconds
- Indoor temperature range: 0 ~ 50 Degrees
- Host sensors can detect three channels
- Temperature range in swimming pool: -40'C~60'C (-40'F~140'F)
- Wireless transmission range: 100m
- Power Supply:
- Transmitter: 2 x AA Batteries (Not Included)
- Receiver: 2 x AAA Batteries (Not Included)
The receiver operation instructions:
1.1 Normal mode:
Ø Press “MODE/SET” key to switch to view ALARM time and current time
Ø Long press “MODE/SET” to enter setting mode
Ø Press “MEM” button to view temperature/large/small value
Ø Press "MEM" button for more than 2 seconds to clear all temperatures, history
Ø Single press “CH/+” button to display and display RF different channel data
Ø Long press “CH/+” key to clear the current display channel data and enter RF receive
Ø Press “CF/-” button to perform C/F switching
Ø Press "SNOOZE" button backlight for 5 seconds
1.2 time setting mode
Ø Press the "MODE/SET" button to switch the display mode to the time mode, the switching sequence is: time è sound è time...
Ø In time mode, long press this key to enter setting mode
Ø The set item will blink at 1Hz frequency
Ø The setting order is: à à à exit from à 12/24 à
Ø Set the result, press "MODE/SET" to confirm
Ø Press the “CH/+” button to increase the set value by one step. If the long press is longer than 2 seconds, the set value will advance at 8 steps per second.
Ø Press “CF/-” single button, set the value back one step, long press for more than 2 seconds, the set value will retreat at 8 steps per second
Ø When the button is not operated within 30 seconds, it will automatically exit the setting mode, and the already set value will be saved
1.3 Alarm Alarm Settings
Ø Press “MODE/SET” button to switch display mode to alarm mode
Ø Long press “MODE/SET” key to enter setting mode
Ø The set item flashes at 1Hz frequency
Ø Setting order: hour à minute à SNZ time (1-20 minutes, default 5 minutes) à exit setting
Ø Press the “CH/+” button to increase the set value by one step. If the long press is longer than 2 seconds, the set value will advance at 8 steps per second.
Ø Press “CF/-” single button, set the value back one step, long press for more than 2 seconds, the set value will retreat at 8 steps per second
Ø Set the result, press "MODE/SET" to confirm
Ø When the button is not operated within 30 seconds, it will automatically exit the setting mode, and the already set value will be saved
Ø When AL time is displayed, press "CH/+" key to switch AL
Ø When it is ringing, press “Snooze/backlight” to delay the time and press other keys to exit the alarm
1.4 Temperature Alarm Settings
Ø Press “C/F” button for a long time to display the temperature alarm of the bathtub. Press “C/F” again to display the ON bath temperature alarm.
Press the “MODE/SET” button again and press the “C/F” button respectively. The “CH” button sets the desired bath temperature alarm. Above this temperature, it will alarm. Press the “MODE/SET” button again and press the “C/F” button respectively. The “CH” button sets the desired bath temperature alarm. If it is lower than this temperature, it will alarm. Press “MODE/SET” again to display the indoor temperature alarm off. Press "C/F" key to display the ON indoor temperature alarm is turned on. Press “MODE/SET” again, press “C/F” key respectively, “CH” key to set the desired indoor temperature alarm, and alarm above this temperature. Press “MODE/SET” again, press “C/F” key respectively, “CH” key to set the desired indoor temperature alarm. If it is lower than this temperature, it will alarm.
The transmitter operating instructions:
Ø “C/F” key: converts Celsius/Fahrenheit temperature once per key
Ø “CH” key: change the channel once for each key press. There are 3 channels to choose from.
Wireless floating swimming pool and spa thermometer
1. Calendar from Jan.1st 2000 to 31st.2099
2. Water temprature range:-40 to 60
3. Indoor temprature range:0 to 50
4. 433MHZ wireless receives 3 chanel's water temprature
5. Max/Min record of indoor and water temprature
6. Calendar: From January 1st to 31st.20991.Calendar from 2000
7. Alarm clock with snooze function

Package Included:
- 1 x Receiver
- 1 x Transmitter
- 1 x English User Manual
- 1 x Package Box

More details:

Similar Products